Kia Cee'd: Adaptive Front Lighting System / Adaptive Front Lighting System Repair procedures
Kia Cee'd JD Service Manual / Body Electrical System / Adaptive Front Lighting System / Adaptive Front Lighting System Repair procedures
| Removal |
AFLS Unit
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
|
| 3. |
Remove the AFLS unti (A) after removing connector and nuts (2EA)
[LHD]
[RHD]
|
| Installation |
AFLS Unit
| 1. |
Install the AFLS unit after connecting the connector.
|
| 2. |
Install the crash pad lower panel.
|
| 3. |
Install the heater and A/C controller.
|
| 4. |
Install the crash pad center garnish.
|
| 5. |
Connect the negative (-) battery terminal.
|
Adaptive Front Lighting System Description and operation
Description
AFLS Unit(ECU)
AFLS located in Cockpit Module is provided information of vehicle (steering
wheel signal,vehicle speed, inclination of vehicle).
Based on provide ...
Height Sensor Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the head lamp height sensor connector.
3.
...
Other information:
Kia Cee'd JD Service Manual: Rear Seat Latch Repair procedures
Replacement
[LH]
•
Put on gloves to protect your hands.
•
...
Kia Cee'd JD Service Manual: External Damper Flywheel Repair procedures
Removal and installation
1.
Remove the dual clutch transmission.
(Refer to Dual Clutch Transmisson(DCT) - "Dual Clutch Transmisson Assembly")
2.
Remove the external damper (A).
Tightenin ...