Kia Cee'd: Charging System / Alternator Description and operation

The Alternator has eight built-in diodes, each rectifying AC current to DC current.

Therefore, DC current appears at alternator "B" terminal.

In addition, the charging voltage of this alternator is regulated by the battery voltage detection system.

The alternator is regulated by the battery voltage detection system.

The main components of the alternator are the rotor, stator, rectifier, capacitor brushes, bearings and V-ribbed belt pulley.

The brush holder contains a built-in electronic voltage regulator.

 

Repair procedures

On-vehicle Inpection    • First of all, check for DTCs. If a DTC is present, perform tro ...

Alternator Specifications

Specification Alternator [Non-ISG type]   Item Specification Rated voltage 13.5V, 90A Speed in use ...

Other information:

Kia Cee'd JD Service Manual: Ignition Coil Repair procedures
Removal 1. Disconnect the battery nagative terminal. 2. Remove the engine cover. 3. Disconnect the ignition coil connector (A).    ...

Kia Cee'd JD Owners Manual: Tire rotation
To equalize tread wear, it is recommended that the tires be rotated every 12,000 km (7,500 miles) or sooner if irregular wear develops. During rotation, check the tires for correct balance. When rotating tires, check for uneven wear and damage. Abnormal wear is usually caused by incorr ...