Kia Cee'd: Troubleshooting / Auto Defogging Sensor Repair procedures
Kia Cee'd JD Service Manual / Heating,Ventilation, Air Conditioning / Troubleshooting / Auto Defogging Sensor Repair procedures
Inspection |
To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC
guide.
Replacement |
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the auto defogging sensor cover (A) by pulling it out.
|
3. |
Disconnect the connector (A) and then remove the auto defogging sensor
(B).
|
4. |
Install in the reverse order of removal.
|
Auto Defogging Sensor Description and operation
Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air condit ...Cluster Ionizer Description and operation
Description The cluster ionizer makes disinfection and decomposition of bad smell from the air-conditioner or inflow air. And it cleans the inside air of a vehicle. When runni ...Other information:
Kia Cee'd JD Service Manual: Front Door Belt Inside Weatherstrip Repair procedures
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
Remove the front door belt inside weatherstrip (A).
3.
Install in the reverse order of rem ...
Kia Cee'd JD Owners Manual: Introduction
■ for 15 inch tire
With the Tire Mobility Kit you stay
mobile even after experiencing a tire
puncture.
The system of compressor and sealing
compound effectively and comfortably
seals most punctures in a
passenger car tire caused by nails
or similar objects and reinflates the
tire ...