Kia Cee'd: ISG (Idle Stop and Go) system / Auto stop
To stop the engine in idle stop mode
1. Decrease the vehicle speed to less than 5 km/h (3 mph).
2. Shift into N (Neutral) position.
3. Release the clutch pedal.
The engine will stop and the green AUTO STOP() indicator on the instrument cluster will illuminate.
Also, a message "Auto Stop" will appear on the LCD display.
✽ NOTICE
You must reach a speed of at least 10 km/h (6 mph) since last idle stop.
✽ NOTICE
If you unfasten the seatbelt or open the driver's door (or engine hood) in auto stop mode, the following will happen:
- The ISG system will deactivate (the light on the ISG OFF button will illuminate).
- A message "Auto Start Deactivated Start Manually" will appear on the LCD display.
ISG (Idle Stop and Go) system
Your vehicle may be equipped with the ISG system, which reduces fuel consumption by automatically shutting down the engine, when the vehicle is at a standstill. (For example : red light, stop ...Auto Start
To restart the engine from idle stop mode Press the clutch pedal when the shift lever is in the N (Neutral) position. A message "Press Clutch Pedal for Auto Start" will appear on the L ...Other information:
Kia Cee'd JD Service Manual: Troubleshooting
Basic Troubleshooting
Basic Troubleshooting Guide
Customer Problem Analysis Sheet
Basic Inspection Procedure
Measuring Condition of Electronic Parts' Resistance
The measured resistance at high temperature after vehicle running may be high
or lo ...
Kia Cee'd JD Owners Manual: Engine coolant temperature gauge
This gauge shows the temperature of the
engine coolant when the ignition switch
is ON.
Do not continue driving with an overheated
engine. If your vehicle overheats, refer
to “If the engine overheats” in chapter 6.
CAUTION
If the gauge pointer moves beyond
the normal range area tow ...