Kia Ceed Manuals Ceed Car Manuals
Technical Info

Kia Cee'd: Manual Transaxle System / Back-up Lamp Switch Repair procedures

Inspection
1.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Disconnect the back up lamp switch connector (A).

4.
Check the continuity between power terminal and signal terminal.
Specification : Approx. below 1Ω

Removal
1.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Disconnect the back up lamp switch connector (A).

4.
Remove the back up lamp switch (A).
Tightening torque :
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

Installation
1.
Install in the reverse order of removal.
  
The back-up lamp switch must be replaced with new one. (Do not reuse it.)
Back-up Lamp Switch Description and operation
Description • Detects the shift operation to the reverse gear. • When the transaxle is in the reverse condition, the reverse shift r ...
Neutral Switch Specifications
Specifications   Item Specified Type ON/OFF Operation condition Neutral position ...
Other information:

Kia Cee'd JD Service Manual: Components and components location
Component Location   1. Delta fixed glass ...

Kia Cee'd JD Owners Manual: Power brakes
Your vehicle has power-assisted brakes that adjust automatically through normal usage. In the event that the power-assisted brakes lose power because of a stalled engine or some other reason, you can still stop your vehicle by applying greater force to the brake pedal than you normally ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts