Kia Cee'd: Blind Spot Detection system / Blind Spot Detection Switch Repair procedures

Kia Cee'd JD Service Manual / Body Electrical System / Blind Spot Detection system / Blind Spot Detection Switch Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel")

3.	Remove the lower crash pad switch assembly (A) after loosening screws.

Inspection

1.	Remove the lower crash pad switch assembly.

2.	Connect the battery voltage to terminals 3 and the ground to terminal 4.

Measure the voltage between terminals 4 and 2 at each position.

[Switch Position]

Position No.	Rotation	Voltage (V) (±5%)
0	0°	10.85
1	15°	9.78
2	30°	9.17
3	45°	8.55
4	60°	7.94
5	75°	7.32
6	90°	6.71

4.	If the voltage is not as specified, replace the head lamp leveling switch.

Blind Spot Detection Switch Components and components location

Circuit Diagram ...

Blind Spot Detection Indicator Components and components location

Components ...

Other information:

Kia Cee'd JD Owners Manual: MAINTENANCE UNDER SEVERE USAGE CONDITIONS - FOR EUROPE
The following items must be serviced more frequently on cars mainly used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals. R : Replace I : Inspect and if necessary, adjust, correct, clean or replace SEVERE DRIVING CONDITIONS A : Repeate ...

Kia Cee'd JD Owners Manual: Tires and wheels
✽ NOTICE We recommend that when replacing tires, use the same originally supplied with the vehicles. If not, that affects driving performance. When driving in high altitude grades, it is natural for the atmospheric pressure to decrease. Therefore, please check the tire pressure ...