Kia Cee'd: Blower / Blower Resistor (Manual) Repair procedures
Kia Cee'd JD Service Manual / Heating,Ventilation, Air Conditioning / Blower / Blower Resistor (Manual) Repair procedures
| Inspection |
| 1. |
Measure the resistance between the terminals.
|
| 2. |
If the measured resistance is not within specification, the blower resistor
must be replaced. (After removing the resistor.)
|
| Replacement |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Disconnect the connector (A) and then remove the blower resistor (B)
after loosening the mounting screws.
|
| 3. |
Install in the reverse order of removal.
|
Blower Motor Repair procedures
Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor does not operate well, ...
Power Mosfet (DATC) Repair procedures
Inspection
1.
Turn the ignition switch ON.
2.
Manually operate the control switch and measure the voltage of the blower
motor.
...
Other information:
Kia Cee'd JD Service Manual: Center Pillar Trim Repair procedures
Replacement
(5Door)
[Center pillar lower trim]
•
Put on gloves to protect your hands.
...
Kia Cee'd JD Owners Manual: Clothes hanger
CAUTION
Do not hang heavy clothes, since
those may damage the hook.
Be careful when opening and closing
the doors. Clothes, etc. may
get caught between the door gap.
WARNING
Do not hang other objects such as
hangers or hard objects except
clothes. Also, do not put heavy,
...