Kia Cee'd: Dual Clutch Transmission Control System / Clutch Actuator Motor 2 (Even Gear) Repair procedures
Kia Cee'd JD Service Manual / Dual Clutch Transmission(DCT) System / Dual Clutch Transmission Control System / Clutch Actuator Motor 2 (Even Gear) Repair procedures
Inspection |
1. |
Turn off the ignition switch.
|
2. |
Disconnect the clutch motor connector (A).
|
3. |
Measure the resistance on the clutch motor terminal.
|
4. |
Refer to the specifications and check that the measured resistance is
as specified.
(Refer to Clutch Actuator Motor 2 - "Specification")
|
Removal |
1. |
Turn off the ignition switch and then disconnect the battery (-) cable.
|
2. |
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
3. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
4. |
Remove the ECM.
(Refer to Fuel System - "Engine Control Module (ECM)")
|
5. |
Disconnect the clutch actuator motor connector (A).
|
6. |
Loosen the mounting screw, and then remove the clutch actuator motor
(A).
|
Installation |
1. |
Install in the reverse order of removal.
|
Clutch Actuator Motor 2 (Even Gear) Schematic diagrams
Schematic Diagrams ...Gear Actuator Motor Description and operation
Description The gear actuator motor is mounted on the complete shaft. The gear actuator motor comprises the shift motor and select motor. The gear actuator shift motor and se ...Other information:
Kia Cee'd JD Service Manual: Special service tools
Special Service Tools
Item
Illustration
Application
Fuel Pressure Gauge
(09353-24100)
Measuring the fuel line pressure
Fuel Pressure Gauge Adapter
(09353-02100)
...
Kia Cee'd JD Owners Manual: Air bag collision sensors
(1) SRS control module
(2) Front impact sensor
(3) Side impact sensor
WARNING
Do not hit or allow any objects to
impact the locations where air bag
or sensors are installed.
This may cause unexpected air
bag deployment, which could
result in serious personal injury
or deat ...