Kia Cee'd: Engine Control System / CVVT Oil Control Valve (OCV) Description and operation

Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load.

By controlling CVVT, the valve over-lap or under-lap occurs, which makes better fuel economy and reduces exhaust gases (NOx, HC) and improves engine performance through reduction of pumping loss, internal EGR effect, improvement of combustion stability, improvement of volumetric efficiency, and increase of expansion work.

This system consist of

-the CVVT Oil Control Valve (OCV) which supplies the engine oil to the cam phaser or cuts the engine oil from the cam phaser in accordance with the ECM PWM (Pulse With Modulation) control signal,

- the CVVT Oil Temperature Sensor (OTS) which measures the engine oil temperature,

-and the Cam Phaser which varies the cam phase by using the hydraulic force of the engine oil.

The engine oil getting out of the CVVT oil control valve varies the cam phase in the direction (Intake Advance/Exhaust Retard) or opposite direction (Intake Retard/Exhaust Advance) of the engine rotation by rotating the rotor connected with the camshaft inside the cam phaser.

Purge Control Solenoid Valve (PCSV) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance betwe ...

CVVT Oil Control Valve (OCV) Specifications

Specification   Item Specification Coil Resistance (Ω) 6.9 ~ 7.9 [20°C(68°F)] ...

Other information:

Kia Cee'd JD Service Manual: Clutch Actuator Motor 2 (Even Gear) Description and operation
Description The clutch actuator motor is mounted on the Dual Clutch Transmission(DCT). The clutch actuator motor comprises an actuator motor that controls the odd clutch and an actuator motor that controls the even clutch. The odd actuator motor receives signals from th ...

Kia Cee'd JD Service Manual: Compressor Components and components location
Components   1. Center Bolt 2. Hub Bolt 3. Hub Assembly 4. Snap Ring 5. Pulley 6. Compressor Assembly 7. Electric Control Valve ...