Kia Ceed Manuals Ceed Car Manuals
Technical Info

Kia Cee'd: Button Engine Start System / ESCL(Electronic Steering Column Lock) Repair procedures

Kia Cee'd JD Service Manual / Body Electrical System / Button Engine Start System / ESCL(Electronic Steering Column Lock) Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remoove the driver crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the steering column shroud upper and lower panel.
(Refer to Body - "Steering Column Shroud Panel")
4.
Disconnect the electronic steering column lock connector (A).

5.
Remove the electronic steering column lock after loosening shear bolts.
(Refer to Steering System - "Steering Column and Shaft")
Installation
1.
Install the electronic steering column lock (A).
  
Do not reuse the shear bolts.
When installing the new shear bolts to the electronic steering column lock, tighten the shear bolts until its head is cut off.
Tightening torque :
7 ~ 13 N.m (0.7 ~ 1.3 kgf.m, 5 ~ 9.4 lb.ft)

2.
Install the steering column.
3.
Install the crash pad lower panel and shroud panel.
ESCL(Electronic Steering Column Lock) Components and components location
Component ...
Ignition Switch Assembly
...
Other information:

Kia Cee'd JD Owners Manual: Engine compartment panel fuse replacement
Diesel only 1. Turn the ignition switch and all other switches off. 2. Remove the fuse box cover by pressing the tap and pulling up. When the blade type fuse is disconnected, remove it by using the clip designed for changing fuses located in the engine room fuse box. Upon removal, ...

Kia Cee'd JD Owners Manual: Pairing PHONE key on the Steering Remote Controller
When No Devices have been Paired 1. Press the key or the key on the steering remote controller. The following screen is displayed. 2. Press the button to enter the Pair Phone screen. (1) Device : Name of device as shown when searching from your Bluetooth® Wireless Technology ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts