Kia Cee'd: Lighting System / Front Fog Lamps Repair procedures
Kia Cee'd JD Service Manual / Body Electrical System / Lighting System / Front Fog Lamps Repair procedures
Inspection |
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the lighting switch of the multifunction switch.
(Refer to Multifunction Switch)
|
3. |
With the front fog lamp switch, make sure that continuity exists between
the terminals below.
If continuity is not as specified, replace the multifunction switch.
Fog Lamp
|
Removal |
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
|
3. |
Remove the front fog lamp connector (A) from the front bumper.
|
4. |
Remove the front fog bulb (A) after turning it counterclockwise.
|
5. |
Remove the front fog lamp assembly (A) after loosening 4 screws.
|
Installation |
1. |
Install the front fog bulb and connect the connect.
|
2. |
Install the front fog lamp assembly.
|
3. |
Install the front bumper cover.
|
Rheostat Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash P ...Rear Fog Lamps Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the lighting switch of the multifunction switch. (Refer t ...Other information:
Kia Cee'd JD Service Manual: Front Strut Assembly Repair procedures
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.2 ~ ...
Kia Cee'd JD Owners Manual: Speed limiter indicator
The indicator illuminates when the speed
limit control system is enabled by move
the lever up on the steering
wheel.
The indicator goes off when the
lever
up again to deactivate the system.
If there is a problem with the speed limit
control system, the “---” indicator will blin ...