Kia Cee'd: Front Seat Belt / Front Seat Belt Pretensioner Repair procedures
| • |
When installing the belt, make sure not to damage the pretensioner.
|
|
| 1. |
Remove the center pillar upper trim.
(Refer to Interior Trim - "Center Pillar Trim")
|
| 2. |
After loosening the mounting bolt, then remove the front seat belt upper
anchor (A).
|
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
|

|
| 3. |
After disconnecting the pretensioner connector lock pin, remove the
front seat belt pretensioner connector (B), loosen the mounting bolts,
then remove the front seat belt pretensioner (A).
|
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
|

|
| 4. |
Install in the reverse order of removal.
| •
|
Replace any damaged clips.
|
| •
|
Make sure the connector is plugged in properly.
|
|
|
[3Door]
| • |
When installing the belt, make sure not to damage the pretensioner.
|
|
| 1. |
Remove the rear inner outer trim.
(Refer to Interior Trim - "Center Pillar Trim")
|
| 2. |
After loosening the mounting bolt, then remove the front seat belt lower
anchor (A).
|
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
|

|
| 3. |
Remove the front seat belt upper anchor cover (A).

|
| 4. |
After loosening the mounting bolt, then remove the front seat belt upper
anchor (A).
|
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
|

|
| 5. |
After disconnecting the pretensioner connector lock pin, remove the
front seat belt pretensioner connector (B), loosen the mounting bolts,
then remove the front seat belt pretensioner (A).
|
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
|

|
| 6. |
Install in the reverse order of removal.
| •
|
Replace any damaged clips.
|
| •
|
Make sure the connector is plugged in properly.
|
|
|
Component Location
[5Door, Waggon]
1. Front seat belt pretensioner
[3Door]
1. Front seat belt ...
Component Location
[5Door, Waggon only]
1. Height adjust
...