Kia Cee'd: Dual Clutch Transmission Control System / Gear Actuator Motor Repair procedures
| Inspection |
| 1. |
Turn off the ignition switch.
|
| 2. |
Disconnect the shift actuator connector (A) and select actuator connector
(B).
|
| 3. |
Measure the resistance on the gear actuator motor terminal.
|
| 4. |
Refer to the specifications and check that the measured resistance is
as specified.
(Refer to Gear Actuator Motor - "Specification")
|
| Removal |
| 1. |
Remove the gear actuator assembly.
(Refer to Dual Clutch Transmission Control System - "Gear actuator")
|
Gear Actuator Motor Schematic diagrams
Schematic Diagrams
...
Input Speed Sensor 1 Description and operation
Description
The input shaft speed sensor is important in that it detects the input shaft
RPM and sends this information to the Transmission Control Module (TCM).
It provides i ...
Other information:
Kia Cee'd JD Owners Manual: Engine compartment precautions
(Diesel engine)
The injector operates at high voltage
(maximum 200v). Therefore, the following
accidents may occur.
- Direct contact with the injector or
injector wiring may cause electric
shock or damage your muscle or
nerve system.
- The electromagnetic wave from the
operating injector ma ...
Kia Cee'd JD Owners Manual: Recommended cold tire inflation
pressures
All tire pressures (including the
spare) should be checked when the
tires are cold. “Cold Tires” means the
vehicle has not been driven for at
least three hours or driven less than
1.6 km (1 mile).
Recommended pressures must be
maintained for the best ride, top vehicle
handling, an ...