Kia Cee'd: Head Lamp Leveling Device / Head Lamp Leveling Switch Repair procedures
Kia Cee'd JD Service Manual / Body Electrical System / Head Lamp Leveling Device / Head Lamp Leveling Switch Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
|
| 3. |
Remove the lower crash pad switch assembly (A) after loosening screws.
|
| Inspection |
| 1. |
Remove the lower crash pad switch assembly.
|
| 2. |
Connect the battery voltage to terminals 3 and the ground to terminal
4.
|
| 3. |
Measure the voltage between terminals 4 and 2 at each position.
[Switch Position]
|
| 4. |
If the voltage is not as specified, replace the head lamp leveling switch.
|
Schematic diagrams
Circuit Diagram
...
Other information:
Kia Cee'd JD Owners Manual: AUTO (Automatic) control
The rain sensor located on the upper end
of the windshield glass senses the
amount of rainfall and controls the wiping
cycle for the proper interval. The more it
rains, the faster the wiper operates.When
the rain stops, the wiper stops.
To vary the speed setting, turn the speed
contro ...
Kia Cee'd JD Service Manual: Front Wheel Speed Sensor Repair procedures
Removal
1.
Remove the front wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the front wheel speed sensor mounting bolt (A).
...