Kia Cee'd: Lighting System / High Mounted stop lamp Repair procedures
Kia Cee'd JD Service Manual / Body Electrical System / Lighting System / High Mounted stop lamp Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the rear spoiler assembly (A).
(Refer to Body - "Rear Spoiler")
|
| 3. |
Remove the high mounted stop lamp (A) after removing the mounting screws.
|
| Installation |
| 1. |
Install the high mounted stop lamp.
|
| 2. |
Install the rear spoiler.
|
| 3. |
Connect the negative (-) battery terminal.
|
Rear Fog Lamps Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the lighting switch of the multifunction switch.
(Refer t ...
Rear Combination Lamp Repair procedures
Removal
[5Door]
Rear Combination lamp (Inside)
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear comb ...
Other information:
Kia Cee'd JD Service Manual: Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immersing the thermistor of the sensor into engine coolant, measure
resistance between the ECTS ...
Kia Cee'd JD Service Manual: Instrument Cluster Repair procedures
Inspection
Speedometer
1.
Adjust the pressure of the tires to the specified level.
2.
Drive the vehicle onto a speedometer tester. Use wheel chocks (A) as
appropriate.
3.
Check if the speedometer ...