Kia Cee'd: Lubrication System / Oil Pressure Switch Repair procedures
Kia Cee'd JD Service Manual / Engine Mechanical System / Lubrication System / Oil Pressure Switch Repair procedures
| Removal and Installation |
| 1. |
Remove the under cover.
|
| 2. |
Remove the oil drain plug, and drain the oil into a container.
|
| 3. |
Remove the oil pressure switch(A).
|
| 4. |
Install in the reverse order of removal.
|
| Inspection |
| 1. |
Check the continuity between the terminal and the body with an ohmmeter.
If there is no continuity, replace the oil pressure switch.
|
| 2. |
Check the continuity between the terminal and the body when the fine
wire is pushed.
If there is continuity even when the fine wire is pushed, replace the
switch.
|
| 3. |
If there is no continuity when a 49.0kpa (0.5kg/cm², 7.1psi) is applied
through the oil hole, the switch is operating properly.
Check for air leakage. If air leaks, the diaphragm is broken.
Replace it.
|
Oil Pump Repair procedures
Removal and Installation
1.
Remove the timing chain cover.
(Refer to Timing System - "Timing Chain Cover")
2.
Remove ...
Oil Pan Components and components location
Components
1. Gasket
2. Oil screen
3. Oil pan
4. Drain plug gasket
5. Drain plug
...
Other information:
Kia Cee'd JD Service Manual: Starter Specifications
Specification
Starter [Non-ISG type]
Item
Specification
Rated voltage
12 V, 1.2 kW
The number of pinion teeth
10
Performance
[No-load, 11 V]
Ampere
...
Kia Cee'd JD Service Manual: TPMS Receiver Schematic diagrams
Circuit Diagram
Hamess Connector
Pin No.
Discription
1
Battery ECU
2
Ignition ON
3
CAN_HIGH
4
CAN_LOW
...