Kia Cee'd: Turn signals and lane change signals / One-touch lane change function
To activate an one-touch lane change function, move the turn signal lever slightly and then release it. The lane change signals will blink 3 times.
You can inactivate one-touch lane change function in “Auto triple turn” of “User setting”. Refer to “User setting” in chapter 4.
✽ NOTICE
If an indicator flash is abnormally quick or slow, bulb may be burned out or have a poor electrical connection in the circuit.
Turn signals and lane change signals
The ignition switch must be on for the
turn signals to function. To turn on the
turn signals, move the lever up or down
(A). Green arrow indicators on the instrument
panel indicate which tur ...
Front fog light
Fog lights are used to provide improved
visibility when visibility is poor due to fog,
rain or snow, etc. The fog lights will turn
on when the fog light switch (1) is turned
on after the pos ...
Other information:
Kia Cee'd JD Owners Manual: Blade inspection
✽ NOTICE
Commercial hot waxes applied by automatic
car washes have been known to
make the windshield difficult to clean.
Contamination of either the windshield or
the wiper blades with foreign matter can
reduce the effectiveness of the windshield
wipers. Common sources of contaminati ...
Kia Cee'd JD Service Manual: Luggage Side Trim Repair procedures
Replacement
[5Door]
•
Put on gloves to protect your hands.
•
...