Kia Cee'd: Rear Bumper / Rear Bumper beam Assembly Repair procedures
| • |
Put on gloves to protect your hands.
|
|
| • |
Use a plastic panel removal tool to remove interior trim pieces
to protect from marring the surface.
|
| • |
Take care not to bend or scratch the cover and other parts.
|
|
| 1. |
Remove the rear bumper cover.
(Refer to Rear Bumper - "Rear Bumper Cover")
|
| 2. |
Disconnect the rear bumper beam mounting wiring harness (B).
|
| 3. |
Detach the clips, then remove the rear bumper beam assembly (A).
|
| 4. |
Install in the reverse order of removal.
| •
|
Replace any damaged clips.
|
| •
|
Make sure the connector is plugged in properly.
|
|
|
Component Location
1. Rear bumper beam assembly
...
Other information:
Kia Cee'd JD Owners Manual: Using USB Mode
Playing/Pausing USB Files
Once a USB is connected, the mode
will automatically start and begin
playing a USB file.
While playing, press the button
to pause and press button to
play.
✽ NOTICE
Loading may require additional
time if there are many files and
folders within the ...
Kia Cee'd JD Service Manual: General information
General
The supplemental restraint system (SRS) is designed to supplement the seat belt
to help reduce the risk or severity of injury to the driver and passenger by
activating and deploying the driver, passenger, side airbag and belt pretensioner
in certain frontal or side c ...
Rear Bumper beam Assembly Components and components location
Front Seat