Kia Ceed Manuals Ceed Car Manuals
Technical Info

Kia Cee'd: Rear Seat / Rear Seat Assembly Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Assembly Repair procedures

Replacement
1.
After loosening the mounting bolts and then push it up and remove the rear seat cushion assembly (A).
Tightening torque :
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)
[5Door, Waggon]

[3Door]

2.
Loosen the rear center seat belt buckle (A) mounting bolt.
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Remove the rear seat back center hinge bracket cover (A).

4.
Loosen the rear seat back mounting bolt (A).
Tightening torque :
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)

5.
Pull out the rear seat center mounting bracket (A).
6.
Remove the rear seat back assembly (B).

7.
Install in the reverse order of removal.
Rear Seat Assembly Components and components location
Component Location   1. Rear seat cushion assembly 2. Rear seat back assembly ...
Rear Seat Back Cover Components and components location
Component Location   1. Rear seat back cover [LH] 2. Rear seat back cover [RH] ...
Other information:

Kia Cee'd JD Service Manual: Blower Unit Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater & blower assembly. (Refer to Heater - "Heater Unit") 3. Separate the blower unit from the heater un ...

Kia Cee'd JD Service Manual: Rear Seat Latch Repair procedures
Replacement [LH]    • Put on gloves to protect your hands.    • ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts