Kia Cee'd: Driver position memory system / Rear Seat Entry (For 3-door vehicle only)
To get in or get out of the rear seat, the driver’s or front passenger’s seat should be folded and the seat should be slide.
Driver’s seat
Front passenger’s seat
1. Fold the front seatback by pulling up the walk-in seat lever and then slide the front seat forward.
2. Set the belt extension guide to position (3).
3. After getting in or getting out, slide the seat rearward while holding the seat cushion and then push the seatback rearward. And set the belt extension guide to position (1) or (2).
Seatback pocket
The seatback pocket is provided on the back of the front passenger’s and driver’s seatbacks. WARNING - Seatback pockets Do not put heavy or sharp objects in the seatback pockets. In an ...Rear seat
...Other information:
Kia Cee'd JD Owners Manual: Use high quality ethylene glycol
coolant
Your vehicle is delivered with high quality
ethylene glycol coolant in the cooling
system. It is the only type of coolant that
should be used because it helps prevent
corrosion in the cooling system, lubricates
the water pump and prevents
freezing. Be sure to replace or replenish
your ...
Kia Cee'd JD Owners Manual: Air bag warning light
This warning light will illuminate for
approximately 6 seconds each time you
turn the ignition switch to the ON position.
This light also comes on when the SRS
is not working properly. If the air bag
warning light does not come on, or continuously
remains on after operating for
about ...