Kia Cee'd: Cooling System / Water pump Repair procedures

Kia Cee'd JD Service Manual / Engine Mechanical System / Cooling System / Water pump Repair procedures

Removal

Loosen the drain plug (A), and drain the engine coolant. Remove the radiator cap to drain with speed.

System is under high pressure when the engine is hot.To avoid danger of releasing scalding engine coolant, remove the cap only when the engine is cool.

2.	Remove the drive belt. (Refer to Timing System - "Drive Belt")

Remove the water pump pulley(A).

Tightening torque :

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

4.	Remove the water pump(A).

Inspection

1.	Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary.

2.	Check the bearing for damage, abnormal noise and sluggish rotation, and replace the coolant pump assembly if necessary.

Check for coolant leakage. If coolant leaks from hole, the seal is defective. Replace the coolant pump assembly and gasket.

A small amount of “weeping” from the bleed hole is normal.

Installation

Install the new gasket and water punp(A).

Tightening torque :

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Install the water pump pulley.

Tightening torque :

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Tighten the bolts diagonally when installing.

3.	Remove the drive belt. (Refer to Timing System - "Drive Belt")

4.	Fill with engine coolant.

5.	Start engine and check for leaks.

6.	Recheck engine coolant level.

Water pump Components and components location

Components 1. Gasket 2. Water pump 3. Water pump pulley ...

Water pump Troubleshooting

Troubleshooting Symptoms Possible Causes Remedy Coolant leakage • From the bleed ...

Other information:

Kia Cee'd JD Service Manual: Specifications
Specifications Item Specification Power source DC 14.4V (-) ground Frequency range / Channel space FM : 87.5 ~ 108 MHz / 50 KHz AM : 522 ~ 1620 KHz / 9 KHz Tuning type ...

Kia Cee'd JD Owners Manual: Manual transaxle shift indicator
This indicator informs you which gear is desired while driving to save fuel. For example : Indicates that shifting up to the 3rd gear is desired (currently the shift lever is in the 2nd or 1st gear). : Indicates that shifting down to the 3rd gear is desired (currently the shift l ...