Kia Rio: SRSCM / Front Impact Sensor (FIS)
Description and operation
| Description |
| • |
The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM. |
| • |
They are remote sensors that detect acceleration due to a collision at its mounting location. |
| • |
The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM. |
Components and components location
| Components |
| 1. Front Impact Sensor
(FIS) |
Repair procedures
| Removal |
| 1. |
Disconnect the battery negative terminal, and wait for at least thirty seconds before beginning work. |
| 2. |
Disconnect the front impact sensor connector (A).
|
| 3. |
Remove the front impact sensor mounting bolt (A).
|
| Installation |
Do not turn the ignition switch ON and do not connect the battery terminal while replacing the front impact sensor. |
| 1. |
Install the new front impact sensor. |
| 2. |
Tighten the front impact sensor mounting bolt.
|
| 3. |
Connect the front impact sensor. |
| 4. |
Reconnect the battery negative terminal. |
| 5. |
After installing the Front Impact Sensor, confirm proper system operation: • Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off. |
SRS Control Module (SRSCM)
Description and operation
Description
The primary purpose of the SRSCM (Supplemental Restraints System Control Module)
is to discriminate between an event that warrants restraint syste ...
Side Impact Sensor (SIS)
Description and operation
Description
•
Side Impact Sensor (SIS) system consists of two Pressure Side Impact
Sensor (P-SIS) which are installed at each center of the ...
Other information:
Kia Rio 2017-2020 YB Owners Manual: Front seat adjustment
Forward and backward To move the seat forward or backward: 1. Pull the seat slide adjustment lever up and hold it. 2. Slide the seat to the position you desire. 3. Release the lever and make sure the seat is locked in place. Adjust the seat before driving, and make sure the seat is locked sec ...
Kia Rio 2017-2020 YB Service Manual: Cruise Control System
Description and operation Description The cruise control system is engaged by the cruise "ON/OFF" main switch located on right of steering wheel column. The system has the capability to cruise, coast, accelerate and resume speed. It also has a safety interrupt, engaged ...