Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Fuel Delivery System / Fuel Tank

Kia Rio 2017-2020 YB Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Tank
Repair procedures
Removal
1.

Release the residual pressure in fuel line.

(Refer to Delivery System - "Release Residual Pressure in Fuel Line”)

2.

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.

3.

Remove the rear seat cushion.

(Refer to Body - "Rear Seat Assembly")

4.

Remove the service cover (A).

5.

Disconnect the fuel pump connector (A).

6.

Disconnect the fuel feed quick-connector (A) and the vapor tube quick-connector (B).

7.

Lift the vehicle and support the fuel tank with a jack.

8.

Remove the center muffler assembly.

(Refer to Engine Mechanical System - "Muffler")

9.

Disconnect the fuel filler hose (A), the leveling hose (B) and the vapor hose (C).

10.

Remove the fuel tank mounting nuts (A), and then remove the fuel tank (B).

Fuel tank installation nut:

39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

Installation
1.

Installation is reverse of removal.

Fuel Delivery System
Components and components location Components Location Fuel Tank & Filler-Neck Assembly 1. Fuel Tank 2. Fuel Pump 3 Fuel Pump Plate Cover 4. Fue ...
Fuel Pump
Repair procedures Inspection [Fuel pump] 1. Turn ignition switch OFF and disconnect the negative (-)battery cable. 2. Remove the fuel pump assembl ...
Other information:

Kia Rio 2017-2020 YB Service Manual: Body Control Module (BCM)


Specifications Specifications [BCM Type] Items Specifications Rated voltage DC 12 V Operating voltage DC 9 - 16 V Operating temperature -31 - 167°F (-35 - 75 ...

Kia Rio 2017-2020 YB Service Manual: Headlamp Leveling System


Components and components location Component Location 1. Headlamp assembly (Built in leveling actuator) 2. Headlamp leveling switch ...
Copyright © www.kiamanual.com 2020-2021