Kia Rio: Features of your vehicle / Hood
Opening the hood
1. Pull the release lever to unlatch the hood. The hood should pop open slightly.
WARNING
Open the hood after turning off the engine on a flat surface, shifting the shift lever to the P (Park) position for Intelligent Variable Transmission and to the 1st (First) gear or R (Reverse) for Manual Transmission, and setting the parking brake.
2. Go to the front of the vehicle, raise the hood slightly, push the secondary latch (1) inside of the hood center and lift the hood (2).
3. Pull the support rod from the hood.
4. Hold the hood open with the support rod.
WARNING - Hot parts
Grasp the support rod in the area wrapped in rubber. The rubber will help prevent you from being burned by hot metal when the engine is hot.
Manual windows
To raise or lower the window, turn the window regulator handle clockwise or counterclockwise.
WARNING
When opening or closing the windows, make sure your passenger's arms, hands
and body are saf ...
Closing the hood
1. Before closing the hood, check the following:
All filler caps in the engine compartment must be correctly installed.
Gloves, rags or any other combustible material must be removed from the
...
Other information:
Kia Rio 2017-2020 YB Service Manual: Brake Booster
Components and components location Components 1. Brake booster assembly 2. Reservoir 3. Master cylinder Repair procedures Brake Booster Operating Test For simple checking of the brake booster operation, carry out the following tes ...
Kia Rio 2017-2020 YB Service Manual: Photo Sensor (FATC only)
Description and operation Description The photo sensor is located at the center of defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving portion, generates an electromotive force in proportion ...