Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Adjustment - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2020 Service ManualKia Rio: Adjustment

TCM Learning
When shift shock is occurred or parts related with the transaxle are replaced, TCM learning should be performed.
In the following case, TCM learning is required.
Transaxle assembly replacement
TCM replacement
TCM upgrading
1.
TCM learning condition
A.
ATF temperature: 40 ~ 100C (104 ~ 212F)
2.
TCM learning procedure
A.
Stop learning
Repeat the below shift pattern four times or more with stepping on the brake.


B.
Driving learning
1.
Drive the vehicle through all gears at D range. Drive from stop to 1st to 2nd to 3rd to 4th to 5th to 6th with keeping fixed throttle open.
2.
Down shift from 6th to 5th, 5th to 4th, 4th to 3rd, 3rd to 2nd, 2nd to 1st.
3.
Repeat the above driving pattern four times or more.
Up-shift throttle open : 15 ~ 25%
Control System Composition
Fault Diagnosis Features a fail-safe mechanism that prevents dangerous situations from developing in the event of a transaxle failure. The limp home mode engages if the transaxle malf ...
Circuit Diagram
...
See also:

Tail Gate Replacement
Tail Gate Assembly Replacement    When removing and installing the tail gate, an assistant ...

Rear Washer Motor Inspection
1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water. 2. Remove the front bumper cover. (Refer to t ...

Warning Lamp Activation
Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a LED lamp check. T ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts