Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Auto Light Sensor Removal - Auto Lighting Control System - Body Electrical System - Kia Rio UB 2012-2020 Service ManualKia Rio: Auto Light Sensor Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the photo & auto light sensor (A) from crash pad upper side by using screw (-) driver.


3.
Remove the auto light connector.
Auto Light Sensor Inspection
In the state of IGN1 ON, when multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor ...
Auto Light Sensor Installation
1. Reconnect the auto light connector. 2. Install the auto light sensor. ...
See also:

Inspection
Clutch Pedal Inspection 1. Measure the clutch pedal height (from the face of the pedal pad to the floorboard) and the clutch pedal clevis pin play (measured at the ...

SS-B Solenoid Valve(ON/OFF) Circuit Diagram
...

Description
The immobilizer system will disable the vehicle unless the proper ignition key is used, in addition to the currently available anti-theft systems such as car alarms, the immobilizer system ai ...

Copyright © www.kiamanual.com 2020-2021