Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Body Side Moulding Replacement - Exterior - Body (Interior and Exterior) - Kia Rio UB 2012-2020 Service ManualKia Rio: Body Side Moulding Replacement

Roof Garnish Replacement

     
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
1.
Using a screwdriver or remover, remove the roof garnish (A).


2.
Installation is the reverse of removal.

     
Replace any damaged clips.
Delta Glass Replacement

     
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
1.
Remove the following items :
A.
Front pillar trim
(Refer to the BD group - "Interior Trim")
2.
After loosening the mounting nuts, then remove the delta glass (A).

Tightening torque :
3.9 ~ 4.4 N.m (0.4 ~ 0.45 kgf.m, 2.9 ~ 3.3 lb-ft)


3.
Installation is the reverse of removal.

     
Replace any damaged clips.
Front Wheel Guard Replacement

     
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
1.
Remove the front tire.
2.
After loosening the mounting screws and clips, then remove the front wheel guard (A).


3.
Installation is the reverse of removal.

     
Replace any damaged clips.
Rear Wheel Guard Replacement

     
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
1.
Remove the rear tire.
2.
After loosening the mounting clips and screws, then remove the rear wheel guard (A).
[A Type]


[B Type]


3.
Installation is the reverse of removal.

     
Replace any damaged clips.
Front Mud Guard Replacement

     
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
1.
After loosening the mounting clip and screws, then remove the front mud guard (A).


2.
Installation is the reverse of removal.

     
Replace any damaged clips.
Rear Mud Guard Replacement

     
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
1.
After loosening the mounting clip and screws, then remove the rear mud guard (A).


2.
Installation is the reverse of removal.

     
Replace any damaged clips.
Rear Wheel Deflector Replacement

     
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
1.
After loosening the mounting clips, then remove the rear wheel deflector (A).


2.
Installation is the reverse of removal.

     
Replace any damaged clips.
Rear Door Adjustment
Glass Adjustment    Check the glass run channel for damage or deterioration, and repl ...
Sunroof Components
1 . Glass panel assembly 2 . Glass panel 3 . Reinforcement glass 4 . Encapsulated glass panel 5 . Wind deflector net assembly 6 . Wind deflector beam 7 . Plate cover [RH] ...
See also:

Antenna Installation
1. Install the roof antenna, then connect the cable and the connector. 2. Install the rear roof trim. ...

Shift Lever Components
1. Shift lever knob 2. Shift lever assembly 3. Select cable assembly 4. Shift cable assembly 5. Retainer ...

Rear Wiper Motor Inspection
Rear Wiper Motor 1. Remove the 4P connector from the rear wiper motor. 2. Connect battery positive (+) and negative (-) cables to terminals ...

Copyright © www.kiamanual.com 2020-2021