Kia Rio: Components

Clutch Cover And Disc

...

Removal

1. Remove the transaxle assembly. (Refer to "Manual transaxle system" in MT group) 2. Remove the clutch cover bolts. Be care ...

See also:

Starter: Installation
1. Install in the reverse order of removal. Starter installation bolt: 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft) ...

Interior Trim Components
[5 Door, 4 Door] 1 . Front pillar trim 2 . Center pillar upper trim 3 . Center pillar lower trim 4 . Rear pillar trim [5 Door] 5 . Front door scuff trim 6 . ...

Valve Body Components Location
1. PCV adjust screw 2. Solenoid valve 3. Oil temperature sensor 4. Accumulator 5. Low & reverse brake(LR/B) pressure flow hole 6. Under drive brake (UD/B) pressur ...