Kia Rio: DC/DC Converter: Removal and Installation

Disconnect the battery negative terminal.

Tightening torque

Without battery sensor :

7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)

With battery sensor :

4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)

2.	Remove the glove box housing. (Refer to BD group)

3.	Disconnect the connector (A) and then remove the DC/DC converter (B).

Installation is reverse order of removal.

After disconnecting then reconnecting the battery negative cable, the ISG function dose not operates until the system is stabilized, about 4 hours.

In the ISG mode, if the power of an audio system turnsOFF by drawdown while “Auto Starting” or “Idle Starting”functi ...

The ISG OFF switch on the crash pad lower panel can be used to deactivate the ISG function. ...