Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Description - Ignition System - Engine Electrical System - Kia Rio UB 2012-2020 Service ManualKia Rio: Description

Ignition timing is controlled by the electronic control ignition timing system.
The standard reference ignition timing data for the engine operating conditions are pre-pro grammed in the memory of the ECM (Engine Control Module).
The engine operating conditions (speed, load, warm-up condition, etc.) are detected by the various sensors. Based on these sensor signals and the ignition timing data, signals to interrupt the primary current are sent to the ECM.
The ignition coil is activated, and timing is controlled.
Ignition System
...
On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test 1. Check for DTCs.    ...
See also:

Front Wiper Motor Inspection
Speed Operation Check 1. Remove the connector (A) from the wiper motor. 1. - 2. IGN+ 3. Parking 4. High 5. GND 6. Low ...

Condenser Inspection
1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdrive ...

Special Service Tools
Tool (Number and Name) Illustration Use 09200-38001,3N000 (Beam) 09200-1P100, 4X000 (Adapter) 09200-2S200 (Supporter) Engine support assembly ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts