Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Disassembly - Cylinder Head - Cylinder Head Assembly - Engine Mechanical System - Kia Rio UB 2012-2020 Service ManualKia Rio: Disassembly


     
Identify MLA(Mechanical lash adjuster), valves, valve springs as they are removed so that each item can be reinstalled in its original position.
1.
Remove the mechanical lash adjusters (MLAs) (A).

     
When removing MLAs, mark all the MLAs for their rearrangement.


2.
Remove the valves.
(1)
Using the SST (09222 - 3K000, 09222 - 3K100), compress the valve spring and remove the retainer lock.


(2)
Remove the spring retainer.
(3)
Remove the valve spring.
(4)
Remove the valve.
(5)
Remove the valve stem seal.
(6)
Using a magnetic finger, remove the spring seat.

     
Do not reuse the valve stem seals.
Removal
Engine removal is not required for this procedure.    Use fender covers to avoid damaging pa ...
Inspection
Cylinder Head 1. Inspect for flatness. Using a precision straight edge and feeler gauge, measure the surface the contacting the cylinder block and the manifolds ...
See also:

Front Wheel Speed Sensor Components
1. Front wheel speed sensor connector 2. Front wheel speed sensor ...

Components
...

Steering Column and Shaft Replacement
1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the fro ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts