Rio Car Manuals
Technical Info

Kia Rio: Foot Actuator (With Auto Defogging System) Replacement

1.	Disconnect the negative (-) battery terminal.

2.	Remove the glove box housing. (Refer to BD group - “Crash pad”)

3.	Remove the cluster ionizer. (Refer to HA group - “Cluster Ionizer”)

4.	Disconnect the connector (A) and then remove the foot actuator (B) after loosening the mounting screws.

5.	Install in the reverse order of removal.

Foot Actuator (With Auto Defogging System) Inspection

1. Turn the ignition switch OFF. 2. Disconnect the foot connector. 3. Verify that the foot actuator operates to ...

Blower

...

See also:

Refrigerant System Service Basics
Refrigerant Recovery Use only service equipment that is U.L-listed and is certified to meet the requirements of SAE J2210 to remove HFC-134a (R-134a) from the air conditioning system. ...

Input Speed Sensor Inspection
1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts