Kia Rio: Front Washer Motor Inspection
Front Washer Motor |
1. |
With the washer motor connected to the reservoir tank, fill the
reservoir tank with water.
Before filling the reservoir tank with water, check the
filter for foreign material or contamination. if necessary,
clean the filter.
|
2. |
Connect positive (+) battery cables to terminal 1 and negative
(-) battery cables to terminal 2 respectively.
|
3. |
Check that the motor operates normally and the washer motor runs
and water sprays from the front nozzles.
|
4. |
If they are abnormal, replace the washer motor.
Connector No.1 : Windshield washer(+)
2 : Ground
|
Front & Rear Washer Motor
1. |
With the washer motor connected to the reservoir tank, fill the
reservoir tank with water.
Before filling the reservoir tank with water, check the
filter for foreign material or contamination. if necessary,
clean the filter.
|
2. |
Connect positive (+) battery cables to terminal 1 and negative
(-) battery cables to terminal 2 respectively.
|
3. |
Check that the motor operates normally and the washer motor runs
and water sprays from the front nozzles.
|
4. |
If they are abnormal, replace the washer motor.
Connector No.1 : Windshield washer(+)
2 : Ground
3 : Rear washer (+)
|
Speed Operation Check
1.
Remove the connector (A) from the wiper motor.
1. -
2. IGN+
3. Parking
4. High
5. GND
6. Low
...
-
When servicing the washer pump, be careful not to damage
the washer pump seal.
...
See also:
Disassembly
Identify MLA(Mechanical lash adjuster), valves, valve springs
as they are removed so that each item can be reinstalled i ...
Troubleshooting
1.
The lamp switch inputs can be checked using the GDS.
2.
To check the input value of lamp switch, select option "Body Control
Module ...
Components
1. Driver Airbag (DAB)
2. Steering Wheel
3. Clock Spring
4. Seat Belt Pretensioner (BPT)
5. Pressure Side Impact Sensor (P-SIS)
6. Side Impact Sensor (SIS)
7. Side Airbag ...