Kia Rio: Fuel Filler Cap

A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap and the filler neck flange contact each other, the ratchet produces a loud clicking noise indicating the seal has been set.

Roll Over Valve (ROV): Repair procedures

Removal 1. Remove the fuel pump. (Refer to Engine Control/Fuel System - “Fuel Pump”) 2. Remove the roll over valve (A) after releasing ...

Fuel Tank Air Filter

Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. ...

See also:

Brake Switch Installation
1. Install is reverse of removal. ...

Tire Wear
   • Using tires and wheel other than the recommended sizes could cause unusual handling ch ...

CVVT (Continuously Variable Valve Timing) System: Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine ...