1. |
After loosening the hinge (A) mounting bolt, adjust the hood (B)
by moving it up or down, or right or left.
|
2. |
Adjust the hood height by turning the hood over slam bumpers (C).
|
3. |
After loosening the hood latch (D) mounting bolts and nuts, adjust
the latch by moving it up or down, or right or left.
|
Adjustment
ETC module learning procedure
When installing new ETC module or re-installing it, ETC module learning
procedure must be performed.
1.
Hold the ignition key o ...
Inhibitor Switch Circuit Diagram
...
5Door Front Body C
Engine mounting hole (Ø12)
Transaxle mounting hole (Ø12)
Engine mounting hole (Ø15)
...