Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Inspection - Timing System - Engine Mechanical System - Kia Rio UB 2012-2020 Service ManualKia Rio: Inspection

Sprockets, Hydraulic Tensioner, Chain Guide, Tensioner Arm
1.
Check the CVVT sprocket, crankshaft sprocket teeth for abnormal wear, cracks or damage. Replace if necessary.
2.
Check a contact surface of the chain tensioner arm and guide for abnormal wear, cracks or damage. Replace if necessary.
3.
Check the hydraulic tensioner for its piston stroke and ratchet operation. Replace if necessary.
Belt, Idler, Pulley
1.
Check the idler for excessive oil leakage, abnormal rotation or vibration. Replace if necessary.
2.
Check belt for maintenance and abnormal wear of V-ribbed part. Replace if necessary.
3.
Check the pulleys for vibration in rotation, oil or dust deposit of V-ribbed part. Replace if necessary.

     
Do not bend, twist or turn the timing chain inside out.
Do not allow the timing chain to come into contact with oil, water and steam.
Removal
Engine removal is not required for this procedure.    Use fender covers to avoid damaging pa ...
Installation
1. Dowel pin of crankshaft setted about 3 with vertical center line. 2. Align the TDC marks (A) of the CVVT sprockets with the upper su ...
See also:

Cleaning
1. Make sure the ignition switch and all accessories are in the OFF position. 2. Disconnect the battery cables (negative first). ...

Temperature Control Actuator Description
The heater unit includes mode control actuator and temperature control actuator. The temperature control actuator is located at the heater unit. It regulates the temperature by the proced ...

Temperature Control Actuator Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the driver side shower duct (A) after loosening the screw. ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts