Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Inspection - Manual Transaxle System - Kia Rio UB 2012-2020 Service ManualKia Rio: Inspection

Manual Transaxle Oil Inspection
Park the vehicle on a level ground and stop the engine.
Retighten the oil filler plug (A) with a new washer.

Check level with finger.

Oil level must be up to fill the hole, if not, add oil until it runs over.

Install filler plug.

Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)

Manual Transaxle Oil Replacement
Park the vehicle on a level ground and stop the engine.
Drain the manual transaxle oil after loosening the drain plug (A).

Install the drain plug with new gasket.

Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0kgf.m, 43.4 ~ 57.9 lb-ft)

Add new oil through the filler plug hole and, fill it just below the plug opening.

Standard oil: SAE 75W/85, API GL-4
Oil capacity: 1.8 ~1.9L (0.48 ~0.50, 1.90 ~ 2.0 U.S. qt., 1.58 ~ 1.67 lmp qt.)

Special Service Tools
Tool (Number and Name) Illustration Use 09200-38001,3N000 (Beam) 09200-1P100, 4X000 (Adapter) 09200-2S200 (Supporter) Engine support assembly ...
Manual Transaxle Components
1. Transaxle support mounting bracket 2. Control shaft complete 3. Back up lamp switch 4. Vehicle speed sensor ...
See also:

Fuel requirements
Your new Kia vehicle is designed to use only unleaded fuel having a pump octane number ((R+M)/2) of 87 (Research Octane Number 91) or higher. Your new vehicle is designed to obtain maximum performa ...

Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are pre-pro grammed in the ...

Brake Switch Removal
1. Turn ignition switch OFF. 2. Remove the crash pad lower panel. (Refer to the Body group-"crash pad") 3. ...

Copyright © 2020-2021