Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Installation - DC DC Converter - Charging System - Engine Electrical System - Kia Rio UB 2012-2020 Service ManualKia Rio: Installation

1.
Install in the reverse order of removal.

     
After reconnecting the battery negative cable, ISG function dose not operates until the system is stabilized, about 4 hours.
If disconnecting the negative (-) battery cable from the battery during repair work for the vehicle equipped with ISG function, Battery sensor recalibration procedure should be performed after finishing the repair work.
(Refer to Charging System - "Battery Sensor")
Removal
1. Disconnect the battery negative terminal. 2. Remove the glove box housing. (Refer to Body - "Glove Box Housing") ...
Battery
...
See also:

Roof Trim Replacement
Sunvisor Replacement    Use a plastic panel removal tool to remove interior trip piec ...

Fuel Pump Inspection
[Fuel pump] 1. Turn ignition switch OFF and disconnect the negative (-)battery cable. 2. Remove the fuel pump assembly. ...

Installation
1. Combustion seal 2. Rubber washer 3. Support disc 4. O-ring ...