Kia Rio: Installation
| •
|
Install the component with the specified torques.
|
| •
|
Note that internal damage may occur when the component
is dropped. If the component has been dropped, inspect before
installing.
|
|
| •
|
Apply the engine coolant to the O-ring.
|
|
| •
|
Insert the sensor in the installation hole and be careful
not to damage.
|
|
|
1. |
Installation is reverse of removal.
Engine Coolant Temperature Sensor
installation :
29.4 ~ 39.2 N.m (3.0 ~ 4.0 kgf.m, 21.7 ~ 28.9 lb-ft)
|
|
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the engine coolant temperature sensor connecto ...
See also:
Refrigerant line Replacement
1.
Discharge refrigerant from refrigeration system.
2.
Replace faulty tube or hose.
...
Transaxle Oil Temperature Sensor Description
Transaxle oil temperature sensor monitors the automatic transaxle fluid's
temperature and conveys the readings to TCM. It is an NTC (Negative Thermal
Coefficient) sensor whose resistance ...
AGM Battery: Cleaning
1.
Make sure the ignition switch and all accessories are in the OFF
position.
2.
Disconnect the battery cables (negative first).
...
Removal
