Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Passenger Airbag (PAB) Module Removal - Airbag Module - Restraint - Kia Rio UB 2012-2020 Service ManualKia Rio: Passenger Airbag (PAB) Module Removal

1.
Disconnect the battery negative cable and wait for at least thirty seconds before beginning work.
2.
Remove the glove box housing.
(Refer to the Body group - "Crash pad")
3.
Disconnect the passenger airbag connector (B) and remove the PAB mounting bolt (A).


4.
Remove the crash pad.
(Refer to the Body group - "Crash pad")

     
If the PAB has been deployed, replace the damaged crash pad.
5.
Remove the heater duct from the crash pad.
6.
Remove the mounting bolts from the crash pad. And then remove the passenger airbag.

     
The removed airbag module should be stored in a clean, dry place with the airbag cushion up.
Passenger Airbag (PAB) Module Components
...
Passenger Airbag (PAB) ModuleInstallation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable from battery and wait for at least thirty seconds bef ...
See also:

Condenser Inspection
1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdrive ...

Installation
   Install the component with the specified torques. ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV termina ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts