Rio Car Manuals
Technical Info

Kia Rio: Positive Crankcase Ventilation (PCV) Valve: Inspection

1.

Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.

If the plunger does not move (PCV valve is clogged), clean or replace the valve.

Positive Crankcase Ventilation (PCV) Valve: Removal

1. Disconnect the vapor hose (A) after removing the fixing clip. 2. Remove the PCV valve (B) after unfastening it. ...

Positive Crankcase Ventilation (PCV) Valve: Installation

1. Installation is reverse of removal. PCV Valve installation: 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) ...

See also:

Seat Belt Switch Removal
1. Remove the front seat. 2. After loosening the mounting bolt, then remove the front seat belt buckle (A). ...

Component Location Index
Engine Room 1. Receiver Drier 2. Condenser 3. Ambient Temperature Sensor 4. Compressor 5. Discharge Hose 6. Suction & Liquid Tube Assembly 7. Service ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications
Direct control VFS[35R/C] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts