Kia Rio: Power Out Side Mirror Switch Inspection
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front door trim panel.
(Refer to the BD group - "Front door")
|
3. |
Disconnect the connector from the power window switch module.
|
4. |
Check for continuity between the terminals in each switch position
according to the table.
[Standard]
[Power Mirror Switch - With Folding Mirror]
[Power Mirror Switch - Without Folding Mirror]
|
1.
Remove the front door quadrant delta cover.
(Refer to the BD group - "Front door")
2.
Disconnect the power door mirror conn ...
See also:
Inspection
1.
Check signal waveform of CKPS and CMPS using a GDS.
Specification:
Refer to “Waveform”
...
Components
...
Power Mosfet (FATC) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the connector (A) and then remove the power mosfet
(B) after loosening the m ...