Kia Rio: Precautions For Catalytic Converter
If a large amount of unburned gasoline flows into the converter,
it may overheat and create a fire hazard. To prevent this observe the
following precautions and explain them to your customer.
1. |
Use only unleaded gasoline.
|
2. |
Do not run the engine while the car is at rest for a long time.
Avoid running the engine at fast idle for more than 10 minutes and idle
speed for more than 20 minutes.
|
3. |
Do not measure engine compression for an extended time. Engine
compression tests must be made as rapidly as possible. Remove the fuel
pump relay before performing a compression test.
|
4. |
Do not dispose of used catalytic converter together with parts
contaminated with gasoline or oil.
|
1.
Prior to servicing the electrical system, be sure to turn off
the ignition switch and disconnect the battery ground cable.
&nb ...
See also:
Radiator: Circuit Diagram
...
Components
1. Guide rod bolt
2. Bleed screw
3. Caliper carrier
4. Caliper body
5. Brake pad
6. Pad retainer
...
Components Location
1. Battery sensor
2. Brake Booster Vacuum Pressure Sensor (BBVPS)
3. AGM battery
4. DC/ DC Converter (LDC)
5. ISG OFF Switch
6. Alternator
7. Starter
8. Brake s ...