Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Radiator: Description - Cooling System - Engine Mechanical System - Kia Rio UB 2012-2020 Service ManualKia Rio: Radiator: Description

[Air conditioning type]
The cooling fan operates in 2 stages (HIGH/LOW). The engine control module (ECM) controls the cooling fan according to the coolant temperature, vehicle speed and A/C operation.
[Cooling fan operation conditions]
A/C switch
A/C pressure
[kgf/cm G (psi G)
Vehicle speed
[km/h (mph)]
Coolant temperature
[C (F)]
Cooling fan speed
OFF

V < 45 (28)
95 ~ 100 (203 ~ 212)
LOW
100 (212) or above
HIGH
45 (28) ≤ V < 80 (49.7)
95 ~ 100 (203 ~ 212)
LOW
100 (212) or above
HIGH
80 (49.7) ≤ V
105 (221) or above
HIGH
ON
P < 6 (85.3)
All
105 (221) or above
HIGH
6 (85.3) ≤ P < 12 (170.7)
V < 45 (28)
45 ~ 100 (113 ~ 212)
LOW
100 (212) or above
HIGH
45 (28) ≤ V < 80 (49.7)
95 ~ 100 (203 ~ 212)
LOW
100 (212) or above
HIGH
80 (49.7) ≤ V
105 (221) or above
HIGH
12 (170.7) ≤ P < 15.5 (120.5)
V < 45 (28)
-30 ~ 95 (-22 ~ 203)
LOW
95 (203) or above
HIGH
45 (28) ≤ V < 80 (49.7)
95 ~ 100 (203 ~ 212)
LOW
100 (212) or above
HIGH
80 (49.7) ≤ V
105 (221) or above
HIGH
15.5 (120.5) ≤ P
All
-30 (-22) or above
HIGH

[Non-Air conditioning type]
The cooling fan operates in single stage. The engine control module (ECM) controls the cooling fan according to the coolant temperature, and vehicle speed.
[Cooling fan operation conditions]
Vehicle speed
[km/h (mph)]
Coolant temperature
[C (F)]
Cooling fan operation
V < 45 (28)
95 ~ 100 (203 ~ 212) or above
On
45 (28) ≤ V < 80 (49.7)
95 ~ 100 (203 ~ 212) or above
On
80 (49.7) ≤ V
105 (221) or above
On

Radiator: Components
1.  Cooling fan & reservoir tank assembly 2.  Radiator lower hose 3.  Air guard 4.  Upper cover 5.  Radiator upper hose 6.  Filler neck ...
Radiator: Specifications
Item Specification Non - Air conditioning type Air conditioning type Fan type PULLER Fan speed control Resistor (On-Off) ...
See also:

Servicing The Electrical System
1. Prior to servicing the electrical system, be sure to turn off the ignition switch and disconnect the battery ground cable. &nb ...

Starter: Installation
1. Install in the reverse order of removal. Starter installation bolt: 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft) ...

Front Lower Arm Replacement
1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts