Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Rain Sensor Installation - Windshield Wiper/Washer - Body Electrical System - Kia Rio UB 2012-2020 Service ManualKia Rio: Rain Sensor Installation


     
In case of the windshield with reflection layer which reflects the infrared rays in sensing field, remove the reflection layer from the rain sensor mounting position prior to installation.
Avoid contamination of the sensor during installation.
1.
Install the rain sensor bracket to the windshield glass using the tape.



     
It is very important that the coupling pad pushes against the windshield completely to prevent bubbles from forming at the contact surface.
2.
Connect the rain sensor connector, and then install the sensor cover.
Rain Sensor Removal
   The rain sensor may not operate properly if contaminated. Protect the rain sensor surface by not removing the cover unti ...
Rear Wiper/Washer
...
See also:

Front Hub / Knuckle Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the brake disc for scoring and damage. 3. C ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Circuit Diagram
...

Foot Actuator (With Auto Defogging System) Inspection
1. Turn the ignition switch OFF. 2. Disconnect the foot connector. 3. Verify that the foot actuator operates to ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts