Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Rear Shock Absorber Replacement - Rear Suspension System - Suspension System - Kia Rio UB 2012-2020 Service ManualKia Rio: Rear Shock Absorber Replacement

1.
Remove the rear wheel & tire.

Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)


     
Be careful not to damage to the hub bolts when removing the rear wheel & tire.


2.
Loosen the bolt & nut and then remove the rear shock absorber (A) from the torsion beam axle (B).

Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)


3.
Remove the rear shock absorber (A) from the frame by loosening the bolt.

Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)


4.
Installation is the reverse of removal.
Rear Shock Absorber Components
   • Must completely be tigtened at the curb position of vehicle when assemble shock ab ...
Rear Shock Absorber Inspection
1. Check the components for damage or deformation. 2. Compress and extend the piston and check that there is no abnormal resistance or unus ...
See also:

Specifications
Fuel Delivery System Items Specification Fuel Tank Capacity 43 lit. (11.4 U.S.gal., 45.4 U.S.qt., 37.8 Imp.qt.) Fuel Filter ...

Installation
   • Install the component with the specified torques. • ...

Components Operations
ECM (Engine Control Module) 1. The ECM(PCM) (A) carries out a check of the ignition key using a special encryption algorithm, which is programmed into the transponder ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts