Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Removal - CVVT & Camshaft - Cylinder Head Assembly - Engine Mechanical System - Kia Rio UB 2012-2020 Service ManualKia Rio: Removal

1.
Remove the cyliner head cover.
(Refer to Timing System)
2.
Remove the timing chain cover.
(Refer to Timing System)
3.
Remove the timing chain.
(Refer to Timing System)
4.
Remove the exhaust oil control valve (OCV) adapter (A).


5.
Remove the camshaft bearing caps (A) with the order below and then detach the intake camshaft and exhaust camshaft.


6.
Remove the intake CVVT assembly (A) and exhaust CVVT (B).



     
When removing the CVVT assembly bolt, prevent the camshaft from rotating by using a wrench.


[CVVT System Mode]
(1) Low Speed / Low Load (2) Part Load (3) Low Speed / High Load (4) High Speed / High Load ...
Inspection
Camshaft Assembly 1. Inspect the cam height. Using a micrometer, measure the cam height. Cam height Intake : 44.15mm (1.7382in ...
See also:

Smart Key
Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS. 2. ...

Installation
   Install the component with the specified torques. ...

Rear Door Adjustment
Glass Adjustment    Check the glass run channel for damage or deterioration, and repl ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts