Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Removal - Clutch Master Cylinder - Clutch System - Kia Rio UB 2012-2020 Service ManualKia Rio: Removal


     
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
1.
Disconnect the push rod (B) from the clutch pedal by removing the snap pin (A) and washer.


2.
Remove the clutch pedal mounting nuts (B-3ea).

Tightening torque:
12.7 ~ 15.7 Nm (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)


3.
Remove the battery and ECM.
(Refer to "Manual transaxle system" in MT group)
4.
Disconnect the clutch tube (B) and reservoir hose (A) from the clutch master cylinder.


5.
Remove the clutch master cylinder by turning it clockwise (A).


Components
1. Master cylinder 2. Ignition lock switch 3. Clutch switch 4. Pedal pad ...
Installation
1. Installation is the reverse of removal.    ...
See also:

Start/Stop Button Installation
1. Install the start/stop button. 2. Install the Audio. ...

Head Lamps Adjustment
Head Lamp Aiming Instructions The head lamps should be aimed with the proper beam-setting equipment, and in accordance with the equipment manufacturer's instructions. ...

Refrigerant line Replacement
1. Discharge refrigerant from refrigeration system. 2. Replace faulty tube or hose.    ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts