Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Removal - Rear Disc Brake - Brake System - Kia Rio UB 2012-2020 Service ManualKia Rio: Removal

1.
Remove the rear wheel & tire.

Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

2.
Remove the parking brake cable (A), after removing the clip (B).



     
Parking brake lever in the car must be in fully loosened position.
3.
Remove the hose eyebolt (B).

Tightening torque:
Brake hose to caliper:
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)


4.
Loosen the caliper mounting bolts (C), then remove the rear caliper assembly (A).

Tightening torque:
Caliper assembly to carrier:
49.0 ~ 58.8 N.m (5.0 ~ 6.0 kgf.m, 36.2 ~ 43.4 lb-ft)


5.
Remove the rear brake disc by loosening the screws (A).


Components
1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Brake pad 6. Pad retainer ...
Replacement
Rear Brake Pads 1. Loosen the guide rod bolt (B) and then remove the rear caliper body (A). Tightening torque: 21.6 ~ 31 ...
See also:

Antenna Coil Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") ...

Inspection
1. Check for DTCs.    If a DTC is ...

Cluster Ionizer (FATC only) Description
The cluster ionizer helps to clean up odors in the vehicle or from the air-conditioner system. When the ignition switch ON, the inoizer runs a "CLEAN" mode and then a "ION& ...

Copyright © www.kiamanual.com 2020-2021