Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Seat Belt Switch Inspection - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Rio UB 2012-2020 Service ManualKia Rio: Seat Belt Switch Inspection

1.
Remove the connector from the switch.
2.
Check for continuity between terminals.
Seat belt condition
Continuity
Fastened
Non-conductive (∞Ω)
Not fastened
Conductive (Ω)


Seat Belt Switch Description
Via the seat belt/Door switch, the ISG function can detect that the driver has fastened the seat belt/door. If the driver has not fastened the seat belt/door, the ISG function reacts as follo ...
Seat Belt Switch Removal
1. Remove the front seat. 2. After loosening the mounting bolt, then remove the front seat belt buckle (A). ...
See also:

Thermostat: Components
1. Water inlet fitting 2. Thermostat 3. Heater pipe 4. Water temp control assembly 5. Water temperature sensor 6. Gasket ...

Description
Emissions Control System consists of three major systems. The Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recy ...

Rear Seat Components
[5 Door] 1. Headrest 2 . Headrest guide 3 . Webbing guide 4 . Rear latch knob 5 . Rear back knob bush 6 . Rear seat back silencer cloth 7 . Rear seat back pad ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts